Analysis 1 of the Causes of Low Speed Printing

- Jun 27, 2018-

Case I: Cannot identify the ink cartridge

Users who use continuous ink supplies may often encounter situations where the machine is not printing after a certain period of use because the printer cannot recognize the black ink cartridge.

Fault cause and solution: This happens mainly because the printer's waste ink tank is full. In fact, every inkjet printer has a fixed accessory life setting. When some accessories have reached the end of their life, the printer will not be able to print. Since the waste ink is easily formed during the use of the continuous ink supply system, it is easy to cause the waste ink tank to be full. This situation can be dealt with in two ways: either clearing the printer's motherboard with reset software to clear the printer's settings; or you can change the sponge in the waste ink tank to the maintenance point. I recommend users to use the latter. Because simply clearing easily leads to waste ink leaking and burning the printer.

TN421 (2).jpg

Editor’s Note: This post was Published by Proffisy on 27 Jun,2018.