Common Fault of Charging Roller (1)

- Mar 05, 2018-

Physical dimensions


1,the burr point of the charging roll film sleeve

The main reason: the burr point resistance is too high, can not be charged, there is a small black spot of the charging roller cycle.

Prevention method: in the process of production, increase the strength of the inspection, the use of full inspection.


2. Poor straightness

The main reasons are: sponge pressure injury, membrane sheath pressure injury, membrane cover injury.

Prevention method: the transportation process strengthens the protection, and takes the gloves when taking the electric stick.

roller.jpg



Editor’s Note: This post was Published by Proffisy on 05 March,2018.