Filling powder is the biggest damage to the toner cartridge?. The more the powder is filled, the better the print quality of the toner cartridge. Generally, when the number of toners is more than 3 times, there will be some regularity. The black spots, and this problem will become more and more serious as the number of printing increases. When the printed characters are blurred or a black mark is printed, the toner cartridge is scrapped, and many people choose to replace the new toner cartridge. In fact, this waste selenium is still available, just need to be repaired by you, and the main job of repairing is to replace the drum and refill the powder. The waste toner must be cleaned up during the process of replacing the drum cartridge. It should be noted that the newly purchased photoreceptor drum has a black anti-exposure seal, and should not be torn off before installation to prevent exposure. It can be removed after the installation is correct.
Editor’s Note: This post was Published by Proffisy on 17 Jul,2018.