How Do I Change the Toner on Mmy Brother DCP l2540dw?

- Dec 18, 2018-

Brother DCP-L2540DW is a reliable, economical monochrome laser multifunction printer for home or small office use. Designed to be sturdy and inexpensive, this printer is a desktop-friendly machine that you can trust. It has a tray of up to 250 pages and can be easily connected via wireless network or Ethernet for up to 30ppm printing and copying. It also has the ability to print from compatible mobile devices over a wireless network and scan documents to various destinations.

Brother DCP-L2540DW uses TN660 black toner (based on powder) instead of ink, so you can get unstained images and text. The toner will eventually run out after continued use. It's best to have enough print supplies in your home or office to keep it running. Inventory helps the copier to operate efficiently. TonerBoss offers a high-quality replacement for the TN660 black ink cartridge for the Brother DCP-L2540DW printer. This toner has been professionally designed to meet or exceed the true specifications and quality output of the TN660 brothers. It offers up to 2,600 pages of print yield and is ideal for high volume printing.

The ability to quickly and correctly replace the copier's toner cartridge allows you to get back to work faster. If you are looking for a quick and easy procedure to replace the toner cartridge in Brother DCP-L2540DW, please follow the instructions below.

Step 1 - Turn on the machine and open the front cover.

Step 2 - Remove the empty toner by pressing the lock lever on the drum unit assembly. It's a good idea to take some paper towels in case your old toner spills, so you won't have a hard time cleaning the toner on the table. Wrap the empty toner and store it safely.

Step 3 - Unpack the new ink cartridge. Try shaking it a few times before removing the orange shield or protective cover. In fact, it is very likely that the powder material inside has already settled during storage. The vibration causes the toner powder to be evenly dispersed inside. Therefore, as much page printing as possible can be obtained.

Step 4 - Install new toner into the drum unit for installation. This should just fall into its place and snap into place.

Step 5 - Move the corona wire cleaner back and forth a few times, then put the whole item back into the machine and close the lid.

The copier then finds and detects the newly installed toner. Press the Go button three times to print the test page. When you are done, you can go!

If you want to replace the TN660 Brother Black Cartridge in stock, Proffisy will be available at a very low price. Just look at our website and have more options. We have a compatible toner cartridge for your brother DCP-L2540DW.


Editor’s Note: This post was Published by Proffisy on 18th Dec,2018.