For many reasons, the color printing process is very important, both for business and consumer, choosing the right process and machine will help users do color printing without additional work or expense. Some color presses are harder to use than other color presses, so ease of use should be considered. Depending on what color printing process the user chooses, the color's vitality may vary. Users should consider how many prints they need each month, because some print processes are more suitable for mass printing, while others are suitable for occasional printing. Thermal imaging can also be important, especially for users who print business cards.
Color printing is not always easy. For example, while the ink jet can make color prints with a touch of a button, a color printer needs to mix ink, prepare a plate, place the plate on the platen, and test the print several times before the machine is ready. This means that you should consider your printing knowledge when choosing a color printing process. If a user can not operate the machine due to the desired printing frequency or color vitality but requires a particular type of machine, more knowledgeable personnel may have to be hired to operate the machine.
Through different color printing processes, changes in vitality or color will usually be different. Offset printers usually print very vivid colors, while inkjet and laser printers are usually just below them, whereas engraving a color process usually produces the brightest print. While some business entities may require a high level of activity, this often increases the price and difficulty of the process, so users should consider the vitality that is truly important in the selection process.
Another consideration is how many prints a color printing process needs to print each month. For example, inkjet printers are commonly used for small to medium prints, and printing that exceeds this limit can quickly lead to component wear on the inkjet printer. The higher number per month also makes the process more expensive to use.
Color printing is usually done with flat printing only; the ink sometimes feels slightly elevated, but not too much. Some business entities and some average consumers may need thermal imaging of business cards and similar materials. By using heat and polymer, the color ink rises significantly from the paper. If you do not need this feature, users should not look for it, because it typically causes the printer to grow larger than just increasing the price.
Editor’s Note: This post was Updated by Proffisy on 12 Feb,2018.